分享该职位

现代线束系统和独立的汽车内饰DRAEXLMAIER作为汽车创新行业的代表-我们专注于制造提高您驾驶体验的产品。每天,全世界大约70.000名同事通力合作,为实现这一目标贡献他们的知识,技能和对汽车行业的热情。每个独特个体都秉承着承担责任,发挥创造力和协作共赢的精神贡献自己的想法和创意。独特的个体就如你!

Injection Molding Shift Supervisor

地点: 

Xiaoshi, CN, 117100

Job Req ID:  8980
职位编码:  50909003

Objective of Job(职位定位)

  • Lead and supervise the discipline of injection molding area.
  • 管理注塑区域的纪律
  • Assure delivery fulfillment and quality by the efficient use of machinery, material and equipment; according to the criteria of production planning.
  • 根据生产计划,通过合理利用机器、材料及工装保质保量的按时完成发货任务
  • Assure compliance with process and procedural directives
  • 确保执行流程文件和程序文件
  • Determine and eliminate defects, rework per instructions as required
  • 判断并消除不良,并根据要求修订相关指南
  • Determine defect causes; create and distribute defect descriptions
  • 判断不良品原因,生成并分发不良品描述
  • Carry out and monitor if write down the document of related data
  • 执行和监督存档相关记录的填写
  • Transfer the infomation of production and qualtiy to the next shfit and report to the leader.
  • 把交接班时关于质量和生产信息传达给下一班次,并向领导汇报
  • Obey company EHS policy and Environment safety guidelines
  • 遵守公司EHS政策及环境安全方针

Principle Activities (工作职责)

  • Assist in the completion of recruitment and HR job interview.
  • 协助HR完成招聘和面试工作Lead and supervise the discipline of injection molding area.
  • 管理注塑区域的纪律
  • Conduct personnel assignment planning and disposition, taking into account company goals.
  • 对人员进行管理和安排,重视公司的目标
  • Instruct, encourage, motivate and evaluate associates.
  • 指导、鼓励、激励并评估员工
  • Assure delivery fulfillment and quality by the efficient use of machinery, material and equipment; according to the criteria of production planning.
  • 根据生产计划,通过合理利用机器、材料及工装保质保量的按时完成发货任务
  • Conduct shift and operations planning
  • 制定管理班次及生产计划
  • Rearrange work processes and work equipment in case of interruptions and bottlenecks
  • 当遇到问题和瓶颈时,重新安排生产流程和工装
  • Save the cost(such as: material )
  • 节约成本(如原材料)
  • Develop/support improvements in processes, equipment and IT systems
  • 改进或支持流程优化、设备工装及IT系统
  • Assure compliance with process and procedural directives
  • 确保执行流程文件和程序文件
  • Implement safety, health and environmental protection regulations
  • 执行安全、健康及环保措施
  • Determine and eliminate defects, rework per instructions as required
  • 判断并消除不良,并根据要求修订相关指南
  • Determine part and material availability and report shortages
  • 判断部件和材料是否够用,如有短缺及时上报。
  • Determine defect causes; create and distribute defect descriptions
  • 判断不良品原因,生成并分发不良品描述
  • Support in optimizing work processes and suggest improvements
  • 支持生产工艺流程优化并提出改进建议
  • Organize production base on the orders from logistic  and meet the requirement from customer
  • 根据物流提供的订单组织生产,来满足客户需求
  • Monitor if the process runs well.
  • 监控生产流程是否正常运转
  • Carry out and monitor if write down the document of related data
  • 执行和监督存档相关记录的填写
  • Transfer the infomation of production and qualtiy to the next shfit and report to the leader.
  • 把交接班时关于质量和生产信息传达给下一班次,并向领导汇报
  •  Take responsibility for tool, equipment and machine's maintaining , can finish those job together with maintenance people.
  • 对模具,设备,机器的保养维护的实施负责。并能和维修人员合作完成这些工作。
  • Make the machine in the best status together with maintenance people.
  • 与维修人员合作保证设备的最佳状态
  • Make good cooperation with tool maker
  • 与模具支持共同合作
  • Increasing quality level and avoid defects, carry out the requirement from quality.
  • 增进质量,避免废件,执行常见的质量方面的要求
  • Take responsibility for 5S, safety and health in injection molding area
  • 对注塑区域的5S,安全和健康保护负责
  • Cooperate with technical department , carry out necessary action to solve customer's complaint
  • 与技术部门合作,执行必要措施应对客户的投诉
  • Carry out the order from the leader
  • 执行领导给出的任务
  • Obey "staff hand book" and company rules
  • 遵守员工手册及公司的相关规定
  • Obey company EHS policy and Environment safety guidelines
  • 遵守公司EHS政策及环境安全方针
  • Making garbage classification, handling the waste water and hazardous waste based on company's requirement. 
  • 按照公司要求进行垃圾分类、废水处置、危险废弃物处置
  • Zu jeder Zeit kostenbewußt und unter stetiger Berücksichtigung der vorgegebenen Qualitätsziele zu einem Optimum an Kundenzufriedenheit und damit zum Gesamterfolg des Unternehmens beizutragen.
  • 随时有成本意识,不断的重视所规定质量目标,达到最佳的客户的满意度,以至于为企业的全面成功做出贡献。

Job Requirements (任职要求)

  • College graduaters or above
  • 大专以上学历             
  • Be familiar with DEC EHS policy and Environment safety guidelines
  • 熟悉公司EHS政策及环境安全方针
  • Experience injection molding above two years work experience
  • 2年以上注塑工作经验
  • 有注塑工作经验优先
  • Be good at using computer
  • 熟练操作电脑
  • With fluent English abilty ,English speaking is preferred
  • 具备流利的英文表达能力者优先
  • Team management experience is preferred
  • 有团队管理经验者优先

 

 

公司: DEC Dräxlmaier (Benxi) Automotive Electrics Co. Ltd., 组织代码: PE-CN-XIA15